CMCP565 Isolated Thermocouple Temperature Transmitters

Location

The CMCP565 Isolated Thermocouple Temperature Transmitters are compatible with J and K type thermocouple inputs, and they provide a 4-20 mA output proportional to the overall measurement. Each unit processes the signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-250° F. Combining transmitters with an existing PLC or DCS system results in a high density, low cost monitoring system.

Buffered Output:

A BNC connector mounted on the front of the unit provides access to the buffered transducer output signal. This includes both the unfiltered vibration signal, and the DC bias voltage. Portable test equipment or analyzers like SKF-CM's Microlog™ can be connected to this output without disturbing other system outputs.

Fault Detection:

On board fault detection circuitry continuously monitors the transducer for normal operation. If a fault occurs, the output current is reduced to 2 mA to indicate the fault to the readout system. A red LED on the front of the unit is turned on to provide a local indication of the fault.

Alarms:

The CMCP565 Isolated Thermocouple Temperature Transmitters do not have any alarm features. For alarms we have the CMCP565A Isolated Thermocouple Temperature Monitors.

Alarms relays and trip multiply are available with the Monitor version.

Alarms - The CMCP500A Series Monitors have two independent set points, with LED alarm indicators and output relay contacts (Alert and Danger). Set points are adjustable via potentiometer, from 0 to 110% of full scale. Each has an adjustable delay of 1 to 10 seconds. SPST Relay contacts are rated 5 Amps @ 30 Vdc or 250 Vac for resistive loads.

Relay contacts can be independently configured by the user for either Normally Open (NO) (Standard) or Normally Closed (NC) operation. Relays are normally de-energized and can be configured for latching or non-latching (standard) operation. Latched alarms may be reset locally or by remote contact closure.

Trip Multiply - The monitors have set point multiplication of 3X via contact closure (2X available). To avoid tripping the alarms during machine start-up.

Displays And Assemblies:

Various display options, NEMA and explosion-proof enclosures, and assembled multi-channel systems are available. Consult your sales representative.

Electrical Specifications:

Power: +24 Vdc @ 45 mA max. (30 mA typical at 2 full scale output). Reverse polarity and transient protection included.(With the Alarm/Relay option installed: 75 mA max.)
Frequency Response (Without optional filters): (-3 dB) 2 Hz to 20 kHz.
Buffered Output: BNC Connector 0-20 kHz.
Accuracy: 5.0 % of Full Scale Range.
Output: 4-20 mA proportional to the full scale range.
Maximum Load: 600 Ohms Resistive.
Case: Isolated

Environmental Specifications:

Operating Temp.: -20°C to +80°C (-4°F to +176°F).
Storage Temp.: -55°C to +125°C (-67°F to +257°F).
Relative Humidity: 0 - 95% Non-Condensing.

Mounting:

32 mm (G style) or 35 mm (T style) DIN Rail.

Similar entries

Central Carolina Scale

Located in Sanford, North Carolina, Central Carolina Scale, Inc. was founded in 1980. Central Carolina Scale employees have over 80 years of combined...

Hampshire Controls Corp

Hampshire Controls Corp. has been designing and manufacturing laboratory grade products for the biomedical, industrial government markets since 1975. We...

Voltech Instruments Inc

Voltech designs, manufactures and markets test and measurement equipment for the power electronics industry. We are focussed on our mission to provide...

The L. S. Starrett Company

The L. S. Starrett Company, founded in 1880, manufactures more than 5,000 variations of Precision Tools, Gages, Measuring Instruments and Saw Blades for...

Midwest Process Controls, Inc.

We offer a range of inventory management services including "JIT", Blanket Purchase Order fulfillment, "Max/Min" or "Keep Full" stocking, and Segregated...

Detcon, Inc.

Detcon is now offering Condulet Enclosures to house a wide range of instruments in hazardous areas.

Magtrol, Inc.

For over 50 years, Magtrol Inc and Magtrol SA have been providing customers with high-quality products to test, measure and control torque-speed-power, load-...